Viscosimetri

Viscometers and rheometers

With a wide choice of rotors and temperature control units. [...]

SALT IN CRUDE

 

99700-6 SETA SALT IN CRUDE ANALYSER
99700-6 SETA SALT IN CRUDE ANALYSER

SETA SALT IN CRUDE ANALYZER. In accordance with methods: ASTM D3230, IP 265

The Seta Salt in Crude Analyser is a portable and extremely robust instrument for the determination of salts contained in crude oils, in total conformity with the ASTM D3230 and IP 265 and equivalent methods.

The analyzer is pre-calibrated and it automatically calculates the salt concentration in g/cm3 or in pounds per thousand barrels (PTB) (lbs/1000bbl). Measurements are directly displayed or can be transferred to the PC.

Features:

  • Salt concentration values automatically displayed
  • It does not require standard mixing
  • Pre-calibrated, for immediate use in accordance with ASTM D3230
  • Typical test time: less than 30 seconds
  • Touch Screen membrane
  • Fully portable, all the elements are contained in an aluminum case
  • It runs on battery or plugged into outlet
  • Supplied with beaker and test sensor holder
  • Conductivity range: 0.0 to 151 lbs/1000bbl (Res: 0.1 lbs/bbl) 0.0 to 430.0 g/m3 (Res: 0.1 g/m3)
  • Temperature range: -20º to 150ºC (res: 0.1ºC)
  • Computer Interface: RS232
  • Dimensions: (HxWxD) 35x70x200mm
  • Weight: 1.6kg (including case)

pdf-iconDownload PDF

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.